Peugeot 208 Front Splitter

A splitter is commonly used to increase the amount of down force at the front of the car. The airstream is brought to stagnation above the splitter by an air dam, causing an area of high pressure. Below the splitter, the air is redirected away from the stagnation zone and is accelerated, causing the pressure to drop. This, combined with the high pressure over the splitter, creates down force. The larger the area of the splitter, the more down force is generated. In most closed-wheel race cars, the underside of the splitter smoothly integrates with the under tray, creating one large flat plane that is driven by the rear diffuser.

Peugeot 208 Rear Diffuser

Rear Diffuser for Peugeot 208 single Exhaust models

 

  • TUV Approved

 

Made from Fibreglass, can be painted

Peugeot 208 Side Skirts

Side Skirts for Peugeot 208

 

  • TUV Approved

 

Made from Fibreglass,ready for painting

Carbon Stubby Aerial

Improve Styling & Appearance
Comes with 4 Different Size Studs

  • Direct Bolt-On Replacement
  • Improve Styling & Appearance
  • Easy Installation
  • Fits Peugeot (use shortest brass stud)

 

Qty 1

 

Alloy Carbon Stubby Aerial

Improve Styling & Appearance. Comes with 4 Different Size Studs

  • Direct Bolt-On Replacement
  • Improve Styling & Appearance
  • Easy Installation
  • Fits Peugeot (use shortest brass stud)

Alloy Carbon Bee Sting Aerial

Improve Styling & Appearance. Comes with 4 Different Size Studs

  • Direct Bolt-On Replacement
  • Improve Styling & Appearance
  • Easy Installation
  • Fits Peugeot (use shortest brass stud)

Peugeot 208 Tow Strap Kit - TRS

MSA compliant fabric tow strap from TRS is suitable for fitting to the front. Strap is constructed from pliable webbing with a 5000kg load rate.

 

Fixed strap with a 10 inch (254mm) loop. Takes about 1 minute to install using a socket set and wrench without the need for removing the bumper

 

Available in black, orange or red

 

Kit contains

1 x Tow Strap Bolt

1 x TRS Tow Strap

 

Fits

Peugeot 208 (All models)

Peugeot 208 Tow Strap Kit

Comkotes Tuning has put together this OMP tow strap kit for your Peugeot 208.

 

Our tow strap kit screws into the towing eye hook position on the chassis which is behind the front bumper and can be installed in less than 1 minute using a socket whilst the bumper is still in place.

 

To install

 1. Pop off the plastic towing eye blanking piece from the front bumper giving you access to the deep recessed towing eye hook fixing point on the chassis

 2. Using a socket to mate the OMP tow strap kit to the chassis

 3. (Optional) remove plastic towing eye hook blanking piece by feeding the triangular stop piece through the bumper eye

 

Fits

Peugeot 208 (all models)