308 GTi Mk2 OIL COOLER CATCH CANS ENGINE MOUNTS

SETRAB OIL COOLER KIT + MOCAL ADAPTOR PLATE (308 GTi II)

Whether you are on the road or pushing hard on a track, maintaining the ideal oil temperature increases the power and efficiency of your performance engine.

  • 420mm x 10-row oil cooler
  • High tempreture Nomex vehicle specific hoses 
  • Black anodised -10 JIC hose ends & male-male adaptors
  • Oil exchanger adaptor plate
  • All required fixings and fittings
  • Radiator mounting kit & foam tape

 

Since your engine & turbo is being lubricated with oil its essential you can keep the oil and components within operating temperatures for long periods.

308 GTi II ENGINE MOUNTS (RACE)

This kit uses up-rated and stiffened rubber components to significantly reduce engine movement resulting in an improved gear change and reduced stress on exhaust and drivetrain. Your car will also feel more responsive in terms of acceleration.

 
This kit includes:
 

  • 1 x RH Engine Mount
  • 1 x Torque Link (bottom gearbox mount)
  • 1 x Transmission Mount

308 GTi OIL CATCH CAN KIT

Oil Catch Cans are beneficial to reduce carbon build up on the valves. PCV (Positive crank ventilation) is so the block does not crack under pressure. On a PCV system there is a mix of oil, fuel and exhaust gas at cylinder temperatures. Since there is no safe way to vent these gases the setup on stock engines is to route the gas back through the intake which if you have turbo application then enters the turbo and intercooler components before going back into the cylinders to re-burnt and the cycle continues. Oil catch can's which uses a baffle system extracts the oil and fuel along with other contaminants. This oily/fuel mixture will then settle into the base of can after passing over the baffle and since fuel evaporates varied amounts of contaminants when the can is emptied will be seen. It is important to think where to mount a catch can since the mixture being trapped inside it a flammable mixture of fuel and oil.

 

Kit Includes

 

  • 2x Black Alloy fitting adapters
  • 2m Black and Red Braided Steel lined hoses
  • 1x Oil Catch Can (choose from black, blue or red)

*Photo is for illustration purposes only, the item you recieve may differ